Nissan Micra K13 2011- MSG

EPS Motor/Sensor Gear for Nissan Micra K13 2011-

This replacement EPS motor for the Nissan Micra K13 2011- is engineered to match the original unit in every critical dimension, ensuring a bolt-on installation.

Across the 2011-present production run, the Nissan Micra K13 2011- was equipped with several steering system variants depending on whether the vehicle was LHD or RHD, and whether it had a manual or power steering setup. This EPS motor with OE reference 48001-1HA9A matches the power steering configuration. Always verify the number on your existing part before purchasing.

This EPS motor is compatible with the following OE reference numbers:

• 48001-1HA9A
• 48001-3BL0A

Technical Data

Compatible Vehicles

This EPS motor is designed for the following application:

• Nissan Micra K13 2011- (2011-present) — LHD configuration

To confirm this is the correct part for your Nissan Micra K13 2011-, verify that the OE number on your existing EPS motor matches 48001-1HA9A. This number is typically stamped on a metal tag attached to the housing or engraved directly into the component body.

Note: Nissan Micra K13 2011- vehicles produced in different markets may use different steering system configurations. Always cross-reference the OE number for guaranteed fitment.

Common Failure Symptoms

The Nissan Micra K13 2011- is generally a robust vehicle, but the EPS motor is a high-wear component that will eventually show its age. Watch for these indicators:

• Grinding or clunking noises: A metallic clunk when driving over bumps or a grinding noise during turns indicates worn internal bushings or gear teeth in the Nissan Micra K13 2011-'s steering rack.
• Fluid leaks: Reddish or brown power steering fluid pooling under the front of the vehicle, usually near the driver-side wheel well. On the Nissan Micra K13 2011-, leaks commonly originate from the rack end seals where the inner tie rods connect.
• Steering wheel vibration: Vibration felt through the steering column, often worsening at specific speeds. On the Nissan Micra K13 2011-, this can be mistaken for wheel balance issues but actually originates from a worn rack.
• Vehicle pulling to one side: Even after a wheel alignment, the Nissan Micra K13 2011- drifts left or right, suggesting uneven internal resistance in the steering rack assembly.
• Heavy steering at low speed: Parking and tight maneuvers become noticeably harder. The Nissan Micra K13 2011- may feel like the power steering is intermittently failing, especially during the first few minutes of driving in cold weather.

If your Nissan Micra K13 2011- exhibits any combination of these symptoms, have the EPS motor inspected by a qualified mechanic. Continuing to drive with a compromised steering system risks further damage and poses a serious safety hazard.

Why Timely Replacement Matters

Driving a Nissan Micra K13 2011- with a worn EPS motor is not just uncomfortable — it is dangerous. Here is why you should address steering issues as soon as they appear:

• Safety risk: A severely worn EPS motor on the Nissan Micra K13 2011- can cause sudden loss of steering control. Internal components can seize or break without warning, particularly during emergency maneuvers.
• Cascading damage: A failing EPS motor puts stress on connected components. On the Nissan Micra K13 2011-, worn inner tie rods, damaged steering boots, and accelerated tire wear are common secondary failures that multiply the repair cost.
• Tire replacement costs: Incorrect toe alignment caused by a worn EPS motor can destroy a set of front tires on the Nissan Micra K13 2011- in as little as 10,000 kilometers. Given the cost of quality tires, this adds significantly to the total expense of delaying the repair.
• Inspection failure: In many countries, excessive steering play or fluid leaks will cause the Nissan Micra K13 2011- to fail its annual safety inspection. Replacing the EPS motor before the inspection avoids the hassle of a retest.
• Resale value: A Nissan Micra K13 2011- with documented recent steering component replacement commands a higher resale price. Buyers are wary of vehicles with known steering issues, and the cost of replacement is typically recovered in the sale price.

The bottom line: replacing the EPS motor on your Nissan Micra K13 2011- sooner rather than later saves money, prevents safety hazards, and preserves the vehicle's value. KITLAMT makes the replacement affordable with competitive pricing and fast delivery worldwide.

Why Choose KITLAMT for Your Nissan Micra K13 2011-

Unlike many aftermarket suppliers, KITLAMT does not simply re-box generic parts. Each EPS motor for the Nissan Micra K13 2011- is tooled specifically for that application, with mounting points, thread pitches, and spline counts verified against the original OE unit. This attention to detail means our parts fit exactly as the factory intended.

• OE-specification manufacturing — every EPS motor matches the original Nissan Micra K13 2011- unit in fit and function
• 12-month warranty — comprehensive coverage against manufacturing defects
• Global shipping — express delivery to 200+ countries via DHL, FedEx, and UPS
• Technical support — our team can help verify compatibility and troubleshoot installation issues
• Competitive pricing — direct from manufacturer pricing with no middleman markup

Installation Guide

A professional mechanic will typically need 2-4 hours to replace the EPS motor on a Nissan Micra K13 2011-. Here is a summary of the key steps involved in the process:

1. Step 1: Lift the front of the Nissan Micra K13 2011- and secure it on jack stands. Remove both front wheels to access the steering components.
2. Step 2: Disconnect the outer tie rod ends from the steering knuckles using a tie rod separator. Mark the position of the tie rods on the old rack to help with alignment later.
3. Step 3: Place a drain pan beneath the steering rack area. Disconnect the high-pressure and return hydraulic lines from the rack. Be prepared for power steering fluid to drain.
4. Step 4: Remove the mounting bolts securing the steering rack to the subframe. On the Nissan Micra K13 2011-, there are typically 2-4 bolts accessible from underneath.
5. Step 5: Carefully maneuver the old steering rack out through the wheel well or subframe opening. On some Nissan Micra K13 2011- variants, you may need to slightly lower the subframe on one side for clearance.
6. Step 6: Transfer the inner tie rods and boots from the old rack to the new KITLAMT unit if they are not pre-installed. Ensure the boots are properly seated to prevent contamination.
7. Step 7: Install the new KITLAMT EPS motor in the reverse order of removal. Torque all mounting bolts to the manufacturer's specification.
8. Step 8: Reconnect the hydraulic lines using new O-rings. Fill the power steering reservoir with the recommended fluid for the Nissan Micra K13 2011-.
9. Step 9: Bleed the system by turning the steering wheel lock-to-lock with the engine running, checking for leaks at each connection point.
10. Step 10: A four-wheel alignment is mandatory after replacing the EPS motor on the Nissan Micra K13 2011-. This ensures proper toe settings and prevents premature tire wear.

Important: After installing the new EPS motor on your Nissan Micra K13 2011-, always perform a four-wheel alignment and verify there are no fluid leaks before driving the vehicle on public roads.

Frequently Asked Questions

Q: Is this the same as the dealer part for my Nissan Micra K13 2011-?

A: This is an aftermarket replacement manufactured to OE specifications. It is functionally identical to the dealer part — same fit, same performance, same quality materials — but sold under the KITLAMT brand at a significantly lower price point.

Q: What if the OE number on my current EPS motor is different from 48001-1HA9A?

A: If your existing part has a different OE number, it may be a different steering system variant. Contact our team with your OE number and we will cross-reference it. We stock multiple variants for most Nissan Micra K13 2011- applications and can identify the correct one for your specific vehicle.

Q: Do you offer a core exchange program for Nissan Micra K13 2011- parts?

A: We do not currently offer a core exchange program. KITLAMT EPS motor units are brand new, not rebuilt. This means there is no core charge and no need to return your old part, simplifying the ordering process.

Q: What power steering fluid should I use after installing this EPS motor?

A: For hydraulic Nissan Micra K13 2011- models, consult the owner's manual for the recommended fluid specification. Most Nissan Micra K13 2011- vehicles use ATF Dexron III or a dedicated power steering fluid. Do not mix different fluid types, and always flush the system if you are unsure what fluid was previously used.

Q: How is the EPS motor packaged for international shipping?

A: Each Nissan Micra K13 2011- EPS motor is wrapped in anti-rust film, secured with foam inserts in a double-wall corrugated box, and sealed with heavy-duty tape. We have shipped over 500,000 steering components internationally with a damage rate below 0.1%.

Related Products

Explore other steering components available from KITLAMT:

• Nissan Sunny B16 Hydraulic Power Steering Rack
• Honda Civic EK3 1998-2003 Hydraulic Power Steering Rack
• MItsubishi Pajero V73 2000- Hydraulic Power Steering Rack

Browse our full catalog of steering components for Nissan vehicles and other popular brands at kitlamtparts.com.

For pricing, availability, or technical questions about this EPS motor for the Nissan Micra K13 2011- (48001-1HA9A), contact us at sales@kitlamtparts.com. KITLAMT — your trusted source for premium steering components since 2009.